Day-by-Day

Agenda

Programme

Explore Our Agenda

Case Study
08:40AM — 09:05AM

Offshore Wind Energy - Status Quo and Market Potentials until 2030

  • Initial situation and framework conditions
  • Status quo: Climate protection and expansion targets for offshore wind
  • energy worldwide (selected countries)
  • Market development (selected countries)
  • Conclusion
Speaker
Dirk Briese
Dirk Briese

CEO, trend:research GmbH

Case Study
09:05AM — 09:30AM

Catapulting into the Future – How ORE Catapult Supports Innovation

 

  • RAS testing and validation
  • Simulations
  • Modelling
  • Market intelligence

 

Speaker
Ruth Wilson-Nash
Ruth Wilson-Nash

Engineer, Offshore Renewable Energy Catapult

Case Study
09:30AM — 09:55AM

The Future of Fixed-bottom and Floating Wind Operations & Maintenance

  • Floating wind O&M will contribute about 7% of total global offshore wind
  • O&M spend by 2030
  • European O&M market move towards in-house concepts, mainly driven
  • by benefits of scale
  • OEM and Developers will dominate O&M market, leaving little room
  • for ISPs
  • SOV type O&M strategies will become prevalent with increasing project
  • scale and distance to shore
Speaker
Srinivasan Santhakumar
Srinivasan Santhakumar

Principal Analyst, Global Offshore Wind, Wood Mackenzie

Case Study
09:55AM — 10:20AM

Development of Global Collaborative Research Based Education Programs for Operation and Maintenance of Offshore Wind Turbines

.

Speaker
Arvind Keprate
Arvind Keprate

Associate Professor, Oslo Metropolitan University

Case Study
10:20AM — 10:45AM

Major Interventions – An Empirical Study of European Wind Farms Build to Date

  • Detailed review of major component replacements using jack-up vessels at European Wind farms since 2012
  • Performance review of different wind farms, turbines and turbine models
  • Elaboration of observed major component failure patterns throughout the lifetime

Lars-André Bugge Tobaben / Project Manager / sea impact

Networking Break
10:45AM — 11:15AM

One-to -One Meetings & Networking Break

.

Case Study
11:15AM — 11:40AM

Addressing the New Challenges for O&M of Floating Wind Turbine Systems

  • RAO-based case study of vessel and floating wind turbine system motions
  • Critical aspects for operation and maintenance work on floating offshore
  • wind turbines
  • Requirements for improving maintainability and availability of floating
  • wind turbine systems
Speaker
Mareike Leimeister
Mareike Leimeister

Research Associate, Fraunhofer Institute for Wind Energy Systems IWES

Case Study
11:40AM — 12:05PM

Key O&M Challenges/Uncertainties for Commercial-scale Floating Wind

  • Major component exchange – in-situ vs tow-to-port. Can structures
  • be designed for 3rd party crane systems? Will floating vessels and hook
  • compensations systems negate dynamic movements?
  • Risk based inspection approaches – how to inform and subsequently how
  • frequent should inspections occur
  • Use of RAS to reduce/remove requirement for technicians to attend WTG.
  • How to manage SOVs/CTVs in the field with several technicians deployed
  • at various neighbouring turbines with greater spacing due to larger rotor.
  • Weather window implications for crew vessel to return w/r/t dynamic
  • response of structure vs vessel/gangway
  • Station keeping assets (moorings and cables) when turbine
  • is disconnected and towed to port.

Sean Snee / Project Engineer - Marine Operations / ORE Catapult

 

Panel Discussion
12:05PM — 12:45PM

Optimizing Operation and Maintenance for Floating Offshore Wind

  • Operations and maintenance strategies for FOW
  • How to reduce cost through smart O&M strategies
  • How digital technologies can be used to optimized O&M and improve
  • performance
  • What are the new techniques for major component replacement? Are there safe, sustainable methods to do maintenance at site?
  • O&M challenges and solutions for commercial scale floating wind
Panelists
Mareike Leimeister
Mareike Leimeister

Research Associate, Fraunhofer Institute for Wind Energy Systems IWES

George Walker
George Walker

Associate Director, Arup

Adam Blake
Adam Blake

Offshore Wind - Operational Excellence Manager, SSE Renewables

Case Study
12:45PM — 01:10PM

Auiliary Towable Operation and Maintenance Systems for Offshore Wind Turbines

.

Speaker
Carlos García Acón
Carlos García Acón

CEO, Esteyco SA

Lunch Time
01:10PM — 02:10PM

Lunch Time Break

.

Networking Break
02:10PM — 02:20PM

One-to -One Meetings & Networking Break

.

Case Study
02:20PM — 02:45PM

The Importance of O&M Involvement Across the Lifecycle

  • Despite representing 30% of through life cost, operational excellence rarely
  • receives sufficient attention until assets are commissioned.
  • Some recent studies have even questioned the feasibility of O&M
  • for planned floating installations in rough environments.
  • This presentation will cover key considerations at each lifecycle stage,
  • for different technologies and stakeholders, to ensure a holistic
  • and integrated approach to asset management across the lifecycle.
Speaker
George Walker
George Walker

Associate Director, Arup

Case Study
02:45PM — 03:10PM

How to Avoid the Ongoing Headache of Wind Turbine Blade Stud Failures

  • Integrity management strategies
  • Best practice installation and maintenance
  • Defect identification
  • Effective condition monitoring techniques

Pete Andrews / Managing Director / EchoBolt

Case Study
03:10PM — 03:35PM

OPEX Benchmarks Based on Actual European Project Performance

  • Insights from PWs detailed benchmark
  • Review of key drivers of cost (e.g. country differences, project size,
  • distance to shore, age)
  • Overview of the European offshore wind market in terms of OPEX levels

 

Speaker
Leoni Elizabeth Christensen
Leoni Elizabeth Christensen

Head of O&M Strategy, Concepts & OPEX, PEAK Wind - Renewable Services

Case Study
03:35PM — 04:00PM

Going Digital to Optimize O&M

  • O&M utilizing 5G vs TETRA
  • O&M in a remote context
  • Cost vs ROI

Brian Boye / Senior Manager / Semco Maritime A/S

Networking Break
04:00PM — 04:30PM

One-to -One Meetings & Networking Break

.

Case Study
04:30PM — 04:55PM

O&M or IRM for Submarine Cables

  • Monitoring submarine cables during their operational life time
  • O&M for submarine cables
  • Or is it more IRM for submarine cables
  • What is required during the operational life time of cables

 

Speaker
Rene van Kessel
Rene van Kessel

Consultant Submarine Cables, CableAbility

Case Study
04:55PM — 05:20PM

Remote Survey and Subsea Inspection

  • Taking the next steps towards NetZero Operations
  • Increase data driven decision making
  • Increasing the safety performance
  • Real-time insights

 

Speaker
Wouter Maas
Wouter Maas

Solution Director Offshore Wind O&M, Fugro

Case Study
05:20PM — 05:45PM

Trends in Offshore Wind Subsea Inspections

  • Importance of understanding the Underwater environment
  • Data collection and analysis
  • Cutting-edge solutions for subsea surveys
  • Inspections outlook with Floating Offshore Wind asset

 

Speaker
Mahfoud Benregreg
Mahfoud Benregreg

Structural and Mechanical Lead for Operation Engineering, ScottishPower

Case Study
05:45PM — 06:10PM

The Blades as Sensing Device: Holistic Rotor Blade Monitoring

  • Rotor equivalent wind speeds for performance analysis
  • Pitch misalignment and other aerodynamic and mass imbalances
  • Loads and component life time
  • Early blade damage detection for predictive maintenance

Karl Fatrdla / Renewable Energy Consultant / Karl Fatrdla Consulting

Panel Discussion
06:10PM — 06:50PM

How Can we Reduce Costs and Risk of Offshore Wind O&M?

  • Operators view of what equipment providers can do to reduce costs
  • Equipment providers view of what operators can do to reduce costs
  • Driving reliability and innovation through collaboration
  • RAM analyses and risk assessments from offshore wind point of view

Panelists

Brian Boye / Senior Manager / Semco Maritime A/S

Karl Fatrdla / Renewable Energy Consultant / Karl Fatrdla Consulting

García Acón / CEO / Esteyco S.A

Mahfoud Benregreg / Operations Engineering - Structural

and Mechanical Lead / ScottishPower Renewable