Day-by-Day

Agenda

Programme

Explore Our Agenda

Case Study
08:40AM — 09:05AM

Overview of the Global Market for Wind Energy– The Results of the WindEnergy trend:index (15th)

  • Overall market sentiment in the wind energy sector on a global and regional scale
  • Wind turbines: trends in technological development
  • Impact of grid-bottlenecks on wind energy projects Dirk Briese / CEO / trend:research GmbH
Speaker
Dirk Briese
Dirk Briese

CEO, trend:research GmbH

Case Study
09:05AM — 09:30AM

What Future for the Wind Industry in France

  • Current state: age of turbines, dimensions…
  • End of Life Issues faced and opportunities
  • In case of Repowering, what to do of old turbines
Speaker
Laurie Gilbert
Laurie Gilbert

Deputy of Repowering & Partnerships, Q ENERGY

Case Study
09:30AM — 09:55AM

Future Materials and Composition of Windblades

  • Problems of the wind turbine blades
  • New materials under development
  • Eco-design of the materials and the blade as whole
Speaker
Julio Vidal Navarro
Julio Vidal Navarro

Composites and Advanced Recycling Technologies Manager, Aitiip Centro Tecnologico

Case Study
09:55AM — 10:20AM

Re-FIT: Re-Manufacturing Blade Roots to Avoid the Waste of Polyester Rotor Blades

  • Repair solutions of polyester roots
  • Technology for bushing replacement to extend the lifetime of the roots
Speaker
Erik Vos
Erik Vos

Materials and Processing Specialist, We4Ce

Case Study
10:20AM — 10:45AM

Long-term Performance of Re-used EoL Thermoset Composites

The method of structural re-use is presented as a circular solution for traditional End-of-Life thermoset composites. The investigations and results on long-term performance are presented on new composite products that were manufactured with the method based on EoL composites. It is shown that the long-term performance is a key parameter in the environmental impact of the method.

  • End-of-Life thermoset composites
  • Structural re-use
  • Long-term performance
  • Environmental impact
Speaker
Dr. Ir. Albert ten Busschen
Dr. Ir. Albert ten Busschen

Associate Professor, University of Applied Sciences Windesheim

Networking Break
10:45AM — 11:15AM

Networking Break

.

Case Study
11:15AM — 11:40AM

The Challenges of Blade Circularity

  • Today: decommissioning-end of life, market situation, cost, cross sector activities
  • Future: new materials, Eco-Design, full value chain for circularity
Speaker
Bettina Kröger
Bettina Kröger

Senior Sustainability Manager, RWE Renewables Europe & Australia GmbH

Case Study
11:40AM — 12:05PM

Achieving Circularity for Wind Blades by Composite Recycling

  • Presentation of the impact of composites in general, in terms of CO2 savings, and hence interest to preserve the industry
  • Zoom on the wind blade industry, challenges in terms of logistics, preprocessing
  • Presentation and overview of the recycling methods, including our technology - results, scalability
  • Challenges remaining, and recommendations to make the blades recyclable by design.
Speaker
Pascal Gallo
Pascal Gallo

Co-founder & Executive Chairman, Composite Recycling SA

Case Study
12:05PM — 12:30PM

Conversion of Used Wind Turbine Blades to Construction Materials

  • Use of segments of blades for noise barriers
  • Development of railway sleepers using composite sections
  • Evolving value chains: OEM, wind park owner, decom companies, construction industry
  • Economic considerations: gate fees, conversion and process costs, CO2 savings
Speaker
Joachim Karthäuser
Joachim Karthäuser

CEO, Zelk Energy AB

Case Study
12:30PM — 12:55PM

2026 Landfill Ban & the Circular Economy Act: Advancing Sustainability and Circularity for Wind Energy

2026 marks a pivotal year for the European wind industry as the voluntary landfill ban on wind turbine blades enters into force, driving concrete action to ensure end-of-life blades are properly managed within Europe.

Key policy momentum with the upcoming Circular Economy Act: The Act represents a timely opportunity to provide clear rules, harmonise regulations across Member States, and remove barriers for transporting and recycling composite materials and permanent magnets.

What we can expect and aim to achieve: With the right legislative framework, the industry can overcome current challenges, such as inconsistent classification, limited logistics and underdeveloped recycling markets

Speaker
Gian Marco Gioffré
Gian Marco Gioffré

Advisor - Sustainability, WindEurope

Lunch Time
12:55PM — 01:55PM

Lunch

.

Networking Break
01:55PM — 02:05PM

Networking Break

.

Case Study
02:05PM — 02:30PM

Scaling Blade Recycling to Meet Global Demand- from Production to End-of-Life

  • Presenting scale of the challenge and the trend for the next 30 years
  • Need for a pragmatic process that serves countries across the world
  • Parameters determining a scalable process
  • Inputs
  • Outputs
  • Market demand
  • Carbon positive vs carbon negative - verified, accessible data
  • Collaboration - global and local players, government engagement
Speaker
Andrew Billingsley
Andrew Billingsley

CEO, Plaswire Limited

Case Study
02:30PM — 02:55PM

Latest Results of the DeremCo Project

• Examples of mature industrial business cases integrating recycled GFRP from wind blades;

• The importance of the demand-driven circular economy approach in the recycling of composites from wind blades;

• Technical implications of recycling and reprocessing stages of the circular process-chain;

• The YouRban project mobile plant for remote recycling and reprocessing of GFRP industrial scrap.

• Next steps and opportunities for the composite-rich manufacturing industry.

Speaker
Marcello Colledani
Marcello Colledani

Full Professor, Politecnico di Milano / DeremCo Project Coordinator

Case Study
02:55PM — 03:20PM

Scalable Blade Repurposing with Blade–Made

  • Problem determination
  • Proof of concept
  • Scalable solutions
Speaker
Jos de Krieger
Jos de Krieger

Co-Founder / Architect, Blade–Made

Networking Break
03:20PM — 03:50PM

Networking Break

.

Case Study
03:50PM — 04:15PM

Environmental Decision Support for Optimal End-of-Life Blade Repurposing

  • Dealing with end-of-life composite wind turbine blades is a sustainability challenge for the wind energy sector
  • Structural repurposing of end-of-life blades is a proven solution which lies near the top of the waste hierarchy
  • Shared data and streamlined blade assessment and design tools are needed to achieve large-scale repurposing
  • Lifecycle assessment can inform decommissioners to make responsible end-of-life decisions on blades
  • A set of tools developed in the EirBlade project can match blades to optimal repurposing pathways
Speaker
Paul Leahy
Paul Leahy

Head of Energy Engineering, University College Cork

Case Study
04:15PM — 04:40PM

ReWind: Assessing Options for End-of-Life Blade Processing from an Owners Perspective

  • ReWind has helped over 20 companies throughout the world assess and choose the best solution for the recycling of their turbine blades considering cost, circularity and emissions. This talk will walk through examples of how the world’s leading owners are using the ReWind platform to find the best options for their projects.
  • ReWind has mapped the global supply chain for blade recycling and has collected a database of the capabilities of each facility and will present an assessment of the maturity of this market.
  • ReWind will present average circularity rates and an assessment of average cost and emissions of various blade recycling alternatives.
Speaker
Matthew Geraghty
Matthew Geraghty

Chief Executive Officer, ReWind

Case Study
04:40PM — 05:05PM

Wind Technology Recycling Assessment

  • Present results of modeling and analysis to evaluate technical, environmental, and economic trade-offs between wind energy technology end-of-life and recycling pathways.
  • Introduce metrics that can be used to compare technologies and inform recommendations for future research funding
  • Discuss LCA environmental impact assessments and techno-economic analysis for blade recycling technologies
  • Provide data that can guide high-impact and high-priority research and development needs in the wind industry
  • Identify opportunities for emerging recycling technologies
Speaker
Derek Stephen Berry
Derek Stephen Berry

Senior Executive Officer, DTU

Panel Discussion
05:05PM — 05:45PM

Wind Turbine Blade Recycling Strategies

  • What alternatives do old blades have to ending up in landfills?
  • Who should take responsibility for recycling blades at the end of life?
  • Is repurposing too expensive an option to consider when decommissioning a wind site?
  • What project examples are out there for blade recycling strategies?
  • What is the current legislation on the recycling of blades?
  • What processes and standards need to change to tackle the problem?
Moderator
Derek Stephen Berry
Derek Stephen Berry

Senior Executive Officer, DTU

Panelists
Jos de Krieger
Jos de Krieger

Co-Founder / Architect, Blade–Made

Pascal Gallo
Pascal Gallo

Co-founder & Executive Chairman, Composite Recycling SA

Andrew Billingsley
Andrew Billingsley

CEO, Plaswire Limited

Paul Leahy
Paul Leahy

Head of Energy Engineering, University College Cork

Matthew Geraghty
Matthew Geraghty

Chief Executive Officer, ReWind

Closing Remark
05:45PM — 05:55PM

Chairman’s Closing Remarks and End of Day One

.