Day-by-Day

Agenda

Programme

Explore Our Agenda

Case Study
08:40AM — 09:05AM

Ongoing Industrial Demonstration Activities of DeremCo: High-added Value Recycling of Composite Materials and their Re-use within and Beyond the Original Application Scenario

The presentation will provide an overview of the ongoing industrial demonstration activities of the European project DeremCo "De-and Remanufacturing for Circular Economy Investments in the Composite Industry", focusing on the high-added value recycling of composite materials and their re-use within and beyond the original application scenario. Several industry-led business cases, integrating glass-fiber reinforced plastics from wind blades into other products, will be discussed showing economic and technical viability. The DeremCo circular approach is made possible by the synergic implementation of two technological strategies focusing respectively on the (i) mechanical recycling and reprocessing of fiber-resin granules and the (ii) thermo-chemical recycling and reprocessing of fibers. This technological approach grounds on the results of the previous large-scale project FiberEUse, that will be briefly summarized, together with the current activities of the originated start-up FiberEUse Tech.

  • Examples of mature industrial business cases integrating recycled GFRP from wind blades.
  • The importance of the demand-driven circular economy approach in the recycling of composites from wind blades.
  • Technical implications of recycling and reprocessing stages of the circular process-chain.
  • Next steps and opportunities for composite-rich manufacturing industries trends.

 

Speaker
Marcello Colledani
Marcello Colledani

Full Professor, Politecnico di Milano / DeremCo Project Coordinator

Case Study
09:05AM — 09:30AM

Revolutionizing Wind Energy: Vestas’ Journey Towards Blade Circularity

  • Vestas’ Blade Circularity Journey: Discussing the evolution of Vestas’ approach to turbine blade design and the shift towards a circular economy.
  • The Power of Collaboration - the CETEC Initiative: Highlighting the advantages of bridging industry and academia to bring forward an innovative solution that will enable the recycling of blades currently in operation as well as future blades.
  • Future Implications: Discussing the potential of this technology to eliminate landfill disposal of decommissioned blades and its contribution to the broader circular economy.

 

Speaker
Nina Kølln Wittig
Nina Kølln Wittig

Materials Specialist in Innovation and Concepts, Vestas

Case Study
09:30AM — 09:55AM

Circular materials in sustainable business models EoLO HUBS

Approach in the European project EoLO HUBS “Wind turbine blades End-of-Life through Open HUBs for circular materials in sustainable business models”
 

Speaker
Julio Vidal Navarro
Julio Vidal Navarro

Composites and Advanced Recycling Technologies Manager, Aitiip Centro Tecnologico

Case Study
09:55AM — 10:20AM

ReWind: Building the world’s leading supply chain database for wind turbine decommissioning and blade recycling

.

Speaker
Declan McGinley
Declan McGinley

Head of Operations ReWind by DNV, DNV

Networking Break
10:20AM — 10:50AM

Coffee & Networking Break

.

Case Study
10:50AM — 11:40AM

Pyrolysis value-chain for decommissioned wind turbine blades with focus on “Glass fibre re-melting proof of concept” - How to make recycling actually happen?

Finding applications for recycled glass fibres – the main ingredient in WTB - remains one of the biggest challenges in recycling composites. A large-scale recycling demonstration by the DecomBlades consortium. In collaboration with 3B-Fibreglass, the consortium showcases a pyrolysis value chain aimed at recovering and remelting glass fibres into new fibres. The ambition was:

  1. To demonstrate the feasibility of re-melting recovered glass fibre and to prove that it is possible;
  2. To demonstrate that the glass fibre produced have the same performance as HiPerTex glass fibres made from virgin raw material;
  3. To evaluate the environmental viability of using pyrolysis for recovering glass fibers from old wind turbine blades and substituting raw materials in the production process of high-quality glass fiber for new blades.

A Blade-to-blade circular solution was demonstrated – a solution that can off-take the quantity of EoL WTB expected in the coming years. The IEA Wind Task 45 network’s objective and aim. Key issues identified through practical experiences: the lack of robust prediction for end-of-use WTB and the absence of reliable wind turbine data.

Speakers
Irene Bach Villadsen
Irene Bach Villadsen

Group R&D | Project Manager, MAKEEN EnviroTech A/S

Justine Beauson
Justine Beauson

Research and Development Engineer, DTU Wind and Energy Systems

Case Study
11:40AM — 12:05PM

Waste2Fiber by ACCIONA and RenerCycle – End of Life Blade Management Process with Thermal Recycling in Southern Europe

  • Management Process with Thermal Recycling in Southern Europe
  • Operator’s challenges on blade recycling
  • Introducing the Waste2Fiber solution
  • The pros and cons of thermal recycling compared to mechanical method
  • Business Opportunities and Industry challenges faced by Waste2Fiber: the business case and current industry needs

Jointly presented by

Sandro Di Noi / Senior WTG Engineer – Blades / RWE Renewables Europe & Australia GmbH

Dr. Marta Barreras / Chief Technology Officer / RenerCycle

Speakers
Sandro Di Noi
Sandro Di Noi

Senior WTG Engineer - Blades, RWE Renewables Europe & Australia GmbH

Marta Barreras
Marta Barreras

Chief Technology Officer, RenerCycle

Case Study
12:05PM — 12:30PM

Protective coatings for leading edge erosion and recycling of wind turbine blade materials

  • Leading edge erosion: the effect of solid airborne particles.
  • Polymer nanocomposite coatings for leading edge protection.
  • Recycling of epoxy-based glass and/or carbon fibre composites as leading edge protective coatings.
Speaker
Vasileios Koutsos
Vasileios Koutsos

Deputy Head of Research Institute, Institute for Materials and Processes, School of Engineering,, The University of Edinburgh

Lunch Time
12:30PM — 02:00PM

Lunch

.

Panel Discussion
02:00PM — 02:30PM

Recycling wind turbine blades

  • Recycling technologies: an overview. Future blades: promising developments.
  • Recycling of wind blade glass fibres and reuse in the next generation blades.
  • Balance between cost and high recycling rates.
  • Will the blades meet recycling standards when it comes to EoL and is recycling a viable option considering the region and logistics.
  • What options are currently available to developers who are looking to recycle or repurpose their blades.
  • Development of a wet-laid fibre process for producing functionally graded adhesive carrier materials.
  • Application of recycled wind blade fibres to address current blade manufacturing defects.
  • Innovative recycling of EOL WTB: materials recovering and re-use.

Panelists

David Morgan / Carbon Rivers

Julio Vidal / Moses productos S.L.

Matthew Korey / Oak Ridge National Lab / VIRTUAL

Mitchell Rencheck / Electric Power Research Institute (EPRI) / VIRTUAL

Ignacio Julian / CIRCE Technology Centre Sandro Di Noi / RWE

Dr. Marta Barreras / RenerCycle

Moderator
David MORGAN
David MORGAN

Chief Strategy Officer, Carbon Rivers

Panelists
Ignacio Julián Burillo
Ignacio Julián Burillo

Technology Project Manager, CIRCE Technological Centre

Mitchell Rencheck
Mitchell Rencheck

Research Engineer V, EPRI

Matthew Korey, Ph.D.
Matthew Korey, Ph.D.

Associate R&D Staff, Oak Ridge National Laboratory

Julio Vidal Navarro
Julio Vidal Navarro

Composites and Advanced Recycling Technologies Manager, Aitiip Centro Tecnologico

Marta Barreras
Marta Barreras

Chief Technology Officer, RenerCycle

Case Study
02:30PM — 02:55PM

Wind Blade Recycling

Wind blade recycling as an economically viable solution for the production of a low carbon hydrogen – emission free with no resource losses.

Speaker
Claudia Martens
Claudia Martens

CEO, Joulmine GmbH & Co. KG

Case Study
02:55PM — 03:20PM

Blade Recycling: From the lab to a Commercial Application

  • Collaboration and partnerships for circularity
  • Solutions and technologies
  • Risk assessment
  • Scalability
Speaker
Kasper Glenning Buhl
Kasper Glenning Buhl

Project Manager, Plastic and Composites, STENA RECYCLING A/S

Networking Break
03:20PM — 03:45PM

Coffee & Networking Break

.

Case Study
03:45PM — 04:10PM

Exploring today’s resin systems in blade manufacture: a sustainability viewpoint

  • Analysing the end-of-life value propositions of today’s resin systems, and tomorrow’s alternatives for wind turbine blades.
  • Summarising the opportunities and challenges associated with each resin system, including the chemical processing, pathway to recycling and the considerations and implications for OEMs  and wind farm owners.
  • Case study to illustrate the economics of the resin systems using the blade volumes produced by the European market.

 

Speaker
Julien Sellier
Julien Sellier

Co-Founder & Managing Director, STRUCTeam

Case Study
04:10PM — 04:35PM

Manufacturing, characterization and recycling of 9- and 13-m recyclable wind blades made with thermoplastic and recyclable thermoset materials

  • Manufacturing challenges and opportunities of new recyclable resin systems.
  • Structural performance comparison of recyclable resin systems.
  • Recycling methodology and research studies for new materials.
  • Discussion, Q&A.
Speaker
Ryan Beach
Ryan Beach

Researcher III - Mechanical Engineering, National Renewable Energy Laboratoryt (NREL)

Case Study
04:35PM — 05:00PM

Unlocking the power of synergy: bringing together technologies to enhance Circularity

  • Fit-for-purpose technology: combining mechanical and chemical recycling processes to guarantee high-quality recycled materials.
  • Customer-centric approach: Developing materials that align with customer needs for performance, price, and efficiency.
  • Removing barriers: the need to address subsidies, competitiveness, regulation, and innovation/R&D to truly establish a circular industry.

 

Speaker
Henrik Selstam
Henrik Selstam

CEO, Afterwind

Case Study
05:00PM — 05:25PM

Turbine blades → building materials

  • Used wind turbine blades can be converted to building materials.
  • Large scale applications, after sawing long rods from the composite sections (in particular spare caps): railway sleepers, flooring in combination with wood-plastic composites, truss systems, concrete reinforcements.
  • Issues: gate fees, regulations, contaminations, finding a home for 100% of materials, including problematic chemicals.
Speaker
Joachim Karthäuser
Joachim Karthäuser

CEO, Zelk Energy AB

Closing Remark
05:25PM — 05:35PM

Chairman’s Closing Remarks and End of Day One

.